Vertical Belt Drive Air Handlers

Air handlers range from 800 CFM to 12000 CFM. Our draw-through designs are available for indoor applications that can handle high static pressures. We offer both galvanized steel casing or a soft white powder coated epoxy casing.

The Vertical Basic Belt-Driven Air Handler (VWG/VWP) draw-through designs are available for indoor applications and are equipped with blowers that can handle high static applications. The VWG/VWP is housed in heavy-gauge galvanized cabinet (or painted casing) and insulated with ½-inch thick, over three pound, neoprene-coated fiberglass. The VWG/VWP comes with a ½-inch OD copper tube coil, forward-curved, dynamically balanced belt-driven blowers, motor, and a galvanized steel, powder-coated epoxy drain pan insulated with ⅛-inch thick insulation. A flat filter section, with a two-inch, 30% pleated efficiency filter is included. Access doors are located on both sides of the unit for easy maintenance. Supply and return-air openings have a one-inch duct collar.

Features

  •  800 to 12,000 CFM
  •  Belt-driven, draw-through design with forward-curved and dynamically balanced blowers
  •  Cabinet is manufactured of heavy-gauge galvanized steel and insulated with 1/2” thick, over three-pound density, neoprene-coated fiberglass
  • Built for indoor applications and are equipped with blowers that can handle up to 3.75 inches of total static pressure
  •  Access doors are provided on both sides of the unit for easy maintenance and are equipped with spring-loaded clips
  •  Coils are manufactured of  1/2” OD copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
  • Galvanized drain pan is finished with a powder-coated epoxy, 1/8” thick insulation and features primary and secondary drain connections
  •  Adjustable, variable-pitch drive sheave and cast-iron pulley keyed to motor shaft
  •  Controls and motors are factory-wired and terminated in a junction box for single-point power supply
  •  Size 800 to 4,000 CFM models are equipped with vibration isolators
  •  Two-inch thick, flatly mounted, 30 percent pleated efficiency filter
  •  One-inch duct collar on return- and supply-air openings
  •  Protective covers keep the grille openings free of debris during shipment and construction
  •  Individually tagged, crated and shipped as scheduled for installation
  •  ETL and AHRI certified;  100% factory tested

Options

Systems

  • DX
  • Chilled-Water
  • Hot-Water
  • Electric Resistance
  • Steam
  • In any combination of the above

Insulation

  • Thickness up to 1"
  • Fiberglass
  • Foil-face
  • Elastomeric

Coils

  • Copper fins/tubes
  • Phenolic-coated
  • Stainless-steel end plates
  • Right or left connections
  • Freeze protection
  • Custom fin spacing

Drain Pan

  • Stainless-steel
  • Extended
  • Drip tray
  • Condensate float switch
  • Condensate pumps

Cabinets

  • Marine duty
  • Extensions

Electrical

  • Motors
    • 115, 208, 230, 277, 460, or 575
    • Single or three phase
    • 50 or 60Hz
    • ODP (open drip proof)
    • TEFC
    • Single speed or two speed
  • Line or low voltage
  • 1 to 65 kW electric resistance heat
  • Disconnects
    • Fused
    • Non-fused
  • Condensate Float Switch
  • Condensate pumps
  • Thermostats
  • UV Light
  • Controls
  • Flow control

Accessories

  • Valve package controls - wide selection of factory-mounted valves and controls
  • Mixing Box
    • Manual
    • Motorized
    • Modulating
    • 3-Position Economizer
  • Filters
    • Two-inch
    • Washable
    • Metallic
    • V-bank
  • Thermostats

Shipping

With our Quick Ship Program, Capital Coil & Air has some of the fastest manufacturing and shipping times in the industry. Explore our shipping options for Vertical Belt Drive Air Handlers.

?
Shipping OptionCost
10 Day Shipment Call for Pricing
5 Day Shipment Call for Pricing
Standard Shipment (3-4 Weeks) Call for Pricing

Tubes

Tube MaterialSizeThickness
Aluminum 5/8" .049" .065"
Brass 5/8" .049" .065"
Carbon Steel 5/8" .049" .065"
Copper 11/2"
25/8"

35/8" (non-freeze)
47/8"
51" (non-freeze)
1.017" .025"
2.020" .025" .035" .049" .065"
3.017" .025"

4.017" .025"
5.017" .025"
Cupro Nickel 15/8"
27/8"
1.035" .049" .065"
2.035" .049" .065"
Stainless Steel 15/8"
27/8"
1.035" .049" .065"
2.049" .065" .109"

Fins

Fin MaterialThickness
Aluminum .006" .008" .010" .016" .030"
Carbon Steel .012"
Copper .006" .008" .010"
Cupro Nickel (90/10) .010"
Stainless Steel (304/316) .010"

Casing

Casing MaterialThickness                  
Aluminum 8 GA.
Galvanized Steel 16 GA. 14 GA.
Stainless Steel 12 GA. 10GA.

Connections

Connection MaterialConnection Type                
Aluminum  
Brass Flanged
Copper M.P.T.
Cupro Nickel Sweat
Steel F.P.T.

Please fill out the form below to inquire about Vertical Belt Drive Air Handlers or other products.

    YOUR DETAILS

    Product interest

     

    I'M ALSO INTERESTED IN

    Cancel

    Talk to a specialist

    Call us at

    1-484-498-8660

    Email us at sales@capitalcoil.com

    Via social media

      OR EMAIL

      Cancel